Ohio cost guide

Radon mitigation system cost in Ohio

A typical 1,800-square-foot Ohio basement home models at $1,450 to $2,450 for professional installation. Adjust the home below, then compare the result with written local quotes.

Updated September 3, 2026Independent educational guide
Ohio cost estimate for 2026

Our model puts a standard system for a 1,800-square-foot Ohio basement home at $1,450 to $2,450, with a midpoint near $1,850. This September 2026 planning estimate applies Ohio’s 2024 overall price level to the site’s national model. A site inspection can move the quote outside that range.

Calculate an Ohio planning range

Change the size, foundation, number of stories, and pipe route. The calculator keeps Ohio’s state adjustment fixed at 7% below the U.S. average. It does not use the radon reading to raise the price because the reading alone does not determine system complexity.

Adjust the Ohio example
The state price-level adjustment stays fixed while you change the home.
sq ft
800 sq ft10,000 sq ft
Stories
Ohio model
Estimated professional installation
$1,450 to $2,450
Home1,800 sq ft · 2 stories
FoundationBasement
2024 state price level
-7%

This is a planning range, not a bid. It applies Ohio’s overall BEA price level to the same national cost model used on this site. Contractor availability, foundation zones, permits, electrical work, and fan placement can change the actual price.

Three worked Ohio examples

These examples use the same inputs shown in the calculator. They are useful for checking the order of magnitude of a quote, but they do not replace pressure-field testing or an inspection of the foundation.

Example homeModel setupOhio planning rangeMidpoint
1,800 sq ft basement home2 stories · standard pipe route$1,450 to $2,450$1,850
1,600 sq ft crawl-space home1 story · standard pipe route$1,450 to $2,450$1,850
2,400 sq ft mixed-foundation home2 stories · complex pipe route$2,150 to $3,700$2,750

Table reviewed September 3, 2026. Figures are model outputs rounded to the nearest $50.

What can change an Ohio quote

Ohio’s price-level adjustment is modest compared with the difference between a simple installation and a difficult one. A basement with a clear exterior pipe route may need one suction point. A house with a basement addition, slab, and crawl space may need separate collection areas, more sealing, or a membrane over exposed soil. Finished rooms can also lengthen the pipe route or require repair work after the pipe is concealed.

Ask the installer to separate optional finish work from the core system price. Electrical work, permit fees, condensate controls, fan noise accessories, and decorative pipe covers may be included by one company and listed separately by another. A quote is easier to compare when it states the suction points, fan location, pipe route, electrical scope, post-installation test, and warranty.

Ohio radon potential and testing

The EPA’s Ohio map places many central and southern counties in Zone 1, the category with the highest predicted average indoor screening levels. Other Ohio counties fall in Zones 2 and 3. The map is meant for planning public programs and building-code work. It cannot predict the reading in an individual house, and the EPA says homes in every zone should be tested.

If you have not tested yet, the Ohio test-kit program currently offers free short-term kits to eligible Ohio homeowners while supplies are available. Follow the kit directions closely. When a result leads to a mitigation decision, confirm which test and documentation your installer, lender, or real-estate transaction requires.

Check Ohio radon zones

Use the state map for regional context, then test the individual home.

EPA Ohio map
Order an Ohio test kit

Check current eligibility and availability on the state-branded program page.

Ohio test-kit program

Ohio requires licensed radon professionals

Ohio law requires licenses for radon testers, mitigation specialists, and mitigation contractors, subject to the exceptions written into the statute. The Ohio Department of Health administers the program. Before signing a contract, ask for the contractor’s Ohio license number and the name and license number of the specialist supervising the work. Confirm that the license is current with the state program.

The company performing the work and the person supervising the design have different roles under Ohio law. A national certification can be a useful credential, but it does not replace any Ohio license that the job requires. The EPA provider page links to national credentialing directories; use it alongside Ohio verification rather than as a substitute.

Questions to ask Ohio installers

Ohio cost questions

Is radon mitigation more expensive in Columbus or Cincinnati?

This page does not claim a city-by-city premium because the available state price index is broader than a contractor market. Labor availability, foundation layout, and pipe routing can create a larger difference than the city name. Use the Ohio range, then compare at least two written scopes from licensed providers serving your address.

Does an Ohio Zone 1 county make the system cost more?

Not automatically. The zone describes predicted regional radon potential, not the system design for a specific home. The installer’s diagnostic work, foundation zones, suction points, fan selection, and pipe route determine the scope.

Does Ohio pay for radon mitigation?

We did not find a current statewide program that promises to cover every homeowner’s installation. Free test kits may reduce the testing cost. Ask the Ohio radon program and your local health department about any income-qualified, county, or time-limited assistance before work begins.

Should the installer perform the final test?

Ask who will perform the post-installation measurement and how Ohio’s testing rules apply. For a real-estate transaction, check the contract and transaction requirements before choosing the test provider.

How this Ohio estimate is built

The national model starts with a $1,150 professional installation allowance. It adds $0.18 per square foot above 1,200 square feet, then adds fixed allowances for foundation type, building height, and pipe routing. The low and high ends widen the midpoint to account for site conditions that the form cannot see.

For Ohio, the model multiplies that midpoint by 0.92774. This comes from the BEA’s 2024 all-items regional price parity of 92.774 for Ohio, where the U.S. average equals 100. The figure covers consumer price levels across the state. It is not a construction bid index or a radon-contractor price survey, so the result remains a range.

Sources and review notes

Last fact-checked September 3, 2026. Cost figures are independent model outputs, not reported Ohio contractor averages. Rules, programs, and availability can change; confirm them before purchasing a service.

Estimate your home’s system

Adjust the home size, foundation, stories, and pipe route to build a planning range.

Open the calculator